Shared, per‑display and per‑desktop layouts in Snapped
Your hotspots live in a layout. Snapped can use one layout everywhere, give each display its own, or give each desktop on each display its own. Two switches decide which, and the same rules apply on a Mac and on a Windows PC.
Turn on Separate layouts per display first: a desktop belongs to one display.
The three modes
One shared layout
Both switches off (the default)
The same hotspots on every display. They are stored as fractions of the screen, so a hotspot 60% wide is 60% wide on your MacBook and on a large monitor alike.
Panel shows: All displays · shared layout
A layout for each display
Separate layouts per display on
Each display has its own hotspots, such as three narrow ones on a laptop and two wide ones on a monitor. A display keeps its layout while it is unplugged, and gets it back when you reconnect it.
Panel shows: Built-in display · own layout
A layout for each desktop on each display
Separate layouts per display and per desktop on
Each desktop on each display has its own hotspots, so a coding desktop and a writing desktop can be set out differently on the same screen.
Panel shows: Built-in display · own layout · Desktop 2
Change the mode
- Open the Snapped window and go to Hotspots & Displays.
- Under Settings, turn on Separate layouts per display to give each display its own hotspots.
- To go further, turn on Separate layouts per desktop as well. It is only available with the first switch on, because a desktop belongs to one display.
Which layout am I editing?
While you edit hotspots, the line at the bottom of the Hotspots panel names the layout: All displays · shared layout, or a display’s name followed by own layout, plus the desktop when layouts follow desktops. With two displays showing different layouts at once, it reads Each display has its own layout, and the panel lists each display’s hotspots under its name. How to create and edit hotspots with Snapped covers the panel in full.
Copy or move a layout to another display
With separate layouts per display on, Hotspots & Displays lists every saved layout: connected displays first, then ones that are unplugged, previewed in their last known shape. Choose a layout, pick a Destination, then:
- Copy it there adds its hotspots to the destination and keeps the ones already there. The original stays as it was.
- Move it there replaces the destination’s hotspots and leaves the original display with none.
Both ask you to confirm before anything changes.
Which mode to choose
Keep one shared layout if you mostly use one screen, or screens of a similar shape. Use a layout per display when you plug a laptop into different monitors, as in these walkthroughs for Mac displays and Windows monitors. Add per desktop when you keep different kinds of work on different desktops and want each set out its own way.
Get Snapped
Start free - up to 100 snaps. No account needed.
For setup instructions and features, see Snapped for Mac or Snapped for Windows.